TheBestLinks.com
TheBestLinks.com
Time-division multiplexing, Bit, Digital, Frequency, Federal Standard 1037C... Print friendly version | Tell a friend
 
Navigation
Search
Toolbox

Time-division multiplexing

From TheBestLinks.com

Time-division multiplexing (TDM): Digital multiplexing in which two or more apparently simultaneous channels are derived from a given frequency spectrum, i.e., bit stream, by interleaving pulses representing bits from different channels.

In some TDM systems, successive pulses represent bits from successive channels, e.g., voice channels in a T1 system. In other systems different channels take turns using the channels for a group of successive pulse-times (a so-called "time slot").

What distinguishes coarse time-division multiplexing from packet switching is that the time-slots are pre-allocated to the channels, rather than arbitrated on a per-time slot basis.

Uses of time-division multiplexing:

  • The PDH and SDH network transmission standards
  • The GSM telephone system

This article was originally based on a Federal Standard 1037C entry is support of MIL-STD-188.

Related Articles


nl:Time-division multiplexing

Related links


Top visited 0 of 0 links

[no links posted yet]

>> place link >>

Discussion

Last posted 0 of 0 messages

[no messages posted yet]

>> post message >>

Watch

You can add this article to your own "watchlist" and receive e-mail notification about all changes in this page.
 
   
Innovate it
This page was last modified 12:59, 21 Aug 2004.
  Content is available under GNU Free Documentation License 1.2.
Powered by MediaWiki