From TheBestLinks.com
On a steam locomotive, a driving wheel is a powered wheel which is driven by the locomotive's pistons (or turbine, in the case of a steam turbine locomotive). On a conventional, non-articulated locomotive, the driving wheels are all coupled together with side rods (also known as coupling rods); normally one pair is directly driven by the main rod (or connecting rod) which is connected to the end of the piston rod; power is transmitted to the others through the side rods.
On an articulated locomotive or a rigid-framed locomotive with divided drive, such as a Duplex locomotive, driving wheels are grouped into sets which are linked together within the set.
Driving wheels are generally larger than leading or trailing wheels. Since a conventional steam locomotive is directly driven, one of the few ways to 'gear' a locomotive for a particular performance goal is to size the driving wheels appropriately. Freight locomotives generally had driving wheels between 40" and 60" in diameter; dual-purpose locomotives generally between 60" and 70", and passenger locomotives betwen 70" and 100" or so.
Driving wheel on tracked vehicles (such as tank or bulldozer) is a large chain wheel that moves the track and rotates it around it.
Related links
Top visited
0 of
0 links
[no links posted yet]
>> place link >>
Discussion
Last posted
0 of
0 messages
[no messages posted yet]
>> post message >>
Watch
You can
add this article to your own "watchlist" and receive e-mail notification about all changes in this page.
