From TheBestLinks.com
C-QUAM is the method of AM stereo broadcasting used in Canada and most other countries, and most of the United States. It was invented in 1977 by Norman Parker, Francis Hilbert, and Yoshio Sakaie, and published in an IEEE journal.
Using circuitry developed by Motorola, C-QUAM uses quadrature amplitude modulation (QAM) to encode the stereo separation signal. This extra signal is then stripped down in such a way that it is compatible with the envelope detector of older receivers (hence the name C-QUAM). A 25Hz pilot tone is added to trigger receivers to reconstruct the stripped signal and decode it.
As with the subcarrier used for FM stereo, the audio in the C-QUAM signal is the stereo difference — the left channel "minus" the right channel (L − R). (This "subtraction" is accomplished by simply reversing the polarity of the right channel before mixing it with the left.) The main audio is the stereo sum, or left channel plus right channel (L + R). Once fully demodulated at the receiver, adding the two together yields the left channel again (L+R + L−R = 2L), and subtracting the difference then gives the right (L+R − L−R = 2R). This method of multiplexing audio is common to all analogue stereo systems.
C-QUAM is not perfect, however, in large part because it exhibits platform motion, with the audio "center" rocking back and forth as if changing the balance knob. This effect is potentially bothersome, especially in a moving vehicle where the received signal changes rapidly, and occupants (particularly the driver) would be more prone to its effects. Also, since some stereo information is contained in the sidebands, adjacent channel interference can cause problems. Finally, when only part of a sideband is attenuated (as often happens to skywave signals reflecting off the ionosphere), an effect known as selective fading, very unpleasant effects result; hence, the C-QUAM system is not often if ever used for shortwave broadcasting, nor by stations which receive a great deal of skywave interference.
C-QUAM is being phased out in the United States as it is incompatible with the IBOC digital radio standard. The IBOC system allows transmission in stereo on the AM band, so it is expected that stations using C-QUAM will transition to IBOC as compatible receivers become more commonplace.
External links
da:C-quam am-stereo
de:AM-Stereo
Related links
Top visited
0 of
0 links
[no links posted yet]
>> place link >>
Discussion
Last posted
0 of
0 messages
[no messages posted yet]
>> post message >>
Watch
You can
add this article to your own "watchlist" and receive e-mail notification about all changes in this page.
